Skip to content
Armor Shield G.O.A.T.
The Ultimate 5-Year DIY Pro-Grade Vehicle Coating . Nanodiamond tech, rapid curing, ultra hydrophobic, mirror like shine.
50ml
Please note: This package is a 50ml bottle only, not a kit.
Available in the US and Canada Only
Shipping and Returns
Free shipping on US orders over $85.
$6.99 for all other orders in the US.
Delivery typically takes 3-5 business days within the lower 48.
Orders received before 12pm are fulfilled the same day. After 12pm, the next business day.
Express shipping in the US is available by selection at checkout.
As long as the product is unopened, we offer a free 90 day, no questions asked return policy.
Satisfaction Guarantee
Our #1 priority here at AvalonKing is your happiness. Which means we stand by our products 100%, no matter what, no questions asked, no holds barred, no ifs, no ands, no buts.
If there was a problem we'll solve it.
Refund it. Send you new product. Send you socks. Whatever it takes.
Just reach out to our customer team. We're here for you.
Please contact our experts for any questions!
THE GREATEST OF ALL TIME.
THERE WE SAID IT.
An industry-first fusion of Nanodiamond technology fused with the world's hardest inorganic polymer. The result? The pinnacle of vehicle protection.
- 5 Year Armor Protection
- Nanodiamond formula
- Rapid curing
- Diamond Hard Scratch Resistance
- Mirror-Like Gloss and Finish
- Extreme Hydrophobic
Lasts 5+ years
Super Hydro/oleophobic
PRO-GRADE made for D.I.Y.
Lasting deep gloss
Diamond Hard Scratch Resistance
6x Faster Curing Time
Please note this product is a bottle ONLY not a kit.
Your kit contains simple illustrated instructions and our expert support is on hand at all times to guide you through the process.
GOAT is safe to apply to:
Paint
Rims
Glass
Trim
- Follow standard ceramic coating preparation procedures.
- Shake the GOAT well for 15 seconds. Place 15 drops on an applicator.
- Apply to 1-2 sections of the car in a crosshatch fashion.
- Wait 1-3 mins watching for a haze to appear, then gently buff the treated areas and buff off excess with a low-nap microfiber towel.
- (optionally) Wait one hour and then apply a second coat repeating the process.
- Allow the coating system to cure for 2 hours before using the vehicle.
To speed up full curing use IR lamps.
IR CURING LAMP INSTRUCTIONS:
- Temperature: 50-60°C / 120-140°F
- Distance to bodywork: 60-70 cm / 24-28 inches.
- Time: 15-20 minutes for each section
Armor Shield IX: G.O.A.T is for the vehicle enthusiast who refuses to settle for anything but the best. It's for the everyday driver who wants their car to shine and be protected from the elements. While it's a pro-grade product, we've made it incredibly simple to apply. Whether you're a seasoned detailer or a DIY enthusiast, Armor Shield IX: G.O.A.T is designed for everyone who demands excellence for their vehicle.
If you wouldn’t crawl over broken glass to secure another bottle of Armor Shield IX: G.O.A.T for your next vehicle within 30 days of application we’ll refund you in full. In addition to this, if the coating does not last the full 5 years after application, we’ll refund you in full.
PREORDER ITEM: Payment taken immediately, does not impact your rights to cancel. Expected shipping date 15/11/2023.
Free shipping on orders over $95.
$6.99 for all other orders in the US.
Delivery typically takes 3-5 business days within the lower 48.
Orders received before 12pm are fulfilled the same day. After 12pm, the next business day.
Overnight and 2 day shipping is available by selection at checkout.
As long as the product is unopened, we offer a free 90 day, no questions asked return policy.
THE GREATEST OF ALL TIME. THERE WE SAID IT.
An industry-first fusion of Nanodiamond technology fused with the world's hardest inorganic polymer. The result? The pinnacle of vehicle protection.
- 5 Year Armor Protection
- Nanodiamond formula
- Rapid curing
- Diamond Hard Scratch Resistance
- Mirror-Like Gloss and Finish
- Extreme Hydrophobic
Lasts 5+ years
Super Hydro/oleophobic
PRO-GRADE made for D.I.Y.
Lasting deep gloss
Diamond Hard Scratch Resistance
6x Faster Curing Time
Please note this product is a bottle ONLY not a kit.
GOAT is a prograde product. We highly recommend only doing the application indoors or in a covered area. It's also extremely important to follow recommended preparation protocol.
Your package contains simple illustrated instructions and our expert support is on hand at all times to guide you through the process.
GOAT is safe to apply to:
Paint
Rims
Trim
- Follow standard ceramic coating preparation procedures.
- Shake the GOAT well for 15 seconds. Place 15 drops on an applicator.
- Apply to 1-2 sections of the car in a crosshatch fashion.
- Wait 1-3 mins watching for a haze to appear, then gently buff the treated areas and buff off excess with a low-nap microfiber towel.
- (optionally) Wait one hour and then apply a second coat repeating the process.
- Allow the coating system to cure for 2 hours before using the vehicle.
To speed up full curing use IR lamps.
IR CURING LAMP INSTRUCTIONS:
- Temperature: 50-60°C / 120-140°F
- Distance to bodywork: 60-70 cm / 24-28 inches.
- Time: 15-20 minutes for each section
Armor Shield IX: G.O.A.T is for the vehicle enthusiast who refuses to settle for anything but the best. It's for the everyday driver who wants their car to shine and be protected from the elements. While it's a pro-grade product, we've made it incredibly simple to apply. Whether you're a seasoned detailer or a DIY enthusiast, Armor Shield IX: G.O.A.T is designed for everyone who demands excellence for their vehicle.
If you wouldn’t crawl over broken glass to secure another bottle of Armor Shield IX: G.O.A.T for your next vehicle within 30 days of application we’ll refund you in full. In addition to this, if the coating does not last the full 5 years after application, we’ll refund you in full.
Free shipping on orders over $85.
$6.99 for all other orders in the US.
Delivery typically takes 3-5 business days within the lower 48.
Orders received before 12pm are fulfilled the same day. After 12pm, the next business day.
Overnight and 2 day shipping is available by selection at checkout.
As long as the product is unopened, we offer a free 90 day, no questions asked return policy.
G.O.A.T. PROTECTION
Unparalleled Hardness and Durability
Harness the power of Nano-Diamond technology. Armor Shield IX: G.O.A.T offers the highest abrasion resistance technology can offer, ensuring your vehicle remains scratch-free and pristine for half a decade.
G.O.A.T. TECHNOLOGY
Revolutionary Hydrophobic Properties
The hallmark of a top ceramic coating, water will bead from your vehicle with exceptional hydrophobic properties. Beyond just repelling water, G.O.A.T ensures dirt, contaminants, UV rays, and pollutants are kept at bay, maintaining your vehicle's pristine condition with unmatched performance.
TRUE PRO-GRADE
Rapid Curing Times. Super Easy Application.
Be road-ready in hours rather than days, with our revolutionary single-stage 4-hour curing time. And application that is even easier than the original Armor Shield IX
Guys, this is the best stuff created on earth. It’s crazy how easy it is to apply, considering it is much stronger (prograde formula). It literally looks like candy paint.
no risk
5 year guarantee
If you are not satisfied for any reason in the first 5 years we get you your money back... and yeah, you heard that 100% right.
See how the different versions stack up against each other
Which Armor Shield is right for you?
2 Year
3 Year
5 Year
Regular Armor Shield IX longevity is 2 Year
Technology
Nano Ceramic
Technology
Nano Ceramic Plus
Technology
Nano Diamond
Gloss level
Gloss level
Gloss level
Hydrophobicity
Hydrophobicity
Hydrophobicity
Initial Curing Time
24 Hours
Initial Curing Time
4 Hours
Initial Curing Time
4 Hours
Regular Armor Shield IX takes 24 Hours to cure
Touch Dry In
4 hours
Touch Dry In
2 Hours
Touch Dry In
1 Hour
Skill level
Beginner
Skill level
Beginner
Skill level
Intermediate
Kit
30ml
Kit
30ml
Bottle Only
50ml
+50%Overall performance vs Armor Shield IX
+250%Overall performance vs Armor Shield IX
Surfaces
Paint, Glass, Rims, Trim,
Surfaces
Paint, Glass, Rims, Trim,
Surfaces
Paint, Rims, Trim,
Slickness
Slickness
Slickness
UV Resistance
UV Resistance
UV Resistance
Chemical Resistance
Chemical Resistance
Chemical Resistance
Contamination Resistance
Contamination Resistance
Contamination Resistance
Hardness Rating
Hardness Rating
Hardness Rating
ALL THE CARS THAT LOOK BETTER THAN YOURS
#COATEDBYTHEKING
Tag us to see your picture featured in our page
FAQs
Answering Your Burning Questions
We get it, you've got some questions that need answering first. Check them out below, and if they're not listed here try our live chat service.
Let's address the G.O.A.T in the room. You're getting a lot of bang for your buck. 2.5x longer lasting, 6x faster curing, in a bottle almost twice as large as our standard ceramic coating. Not to mention access to our latest innovation, nano diamond technology. At just under $40 a year for half a decade, the next best protection money can buy is full body PPF (which is four figures, by the way).
Glad you asked. We took our nano ceramic technology and fused it with the world's hardest inorganic polymer. The result? Diamond like shine, durability and resistance to make a truly next generation coating.
9H is the highest you can score on the pencil scale. This is a test done to coatings to determine their level of resistance to scratches or leaving behind a mark in a surface.
50ml is enough to coat anything from a Harley to a Hummer. That said, if you wish to layer up for more protection there's no harm in ordering extra.
Paint, rims, trim and glass, so virtually any solid exterior surface. It also works on PPF, vinyl, and wraps just the same as painted surfaces.
Yes, all of our coatings act like a liquid glass that enhance the textures beneath. Gloss becomes super gloss, matte becomes more matte, metalic becomes more metalic, you get the idea.
Yes, in fact we recommend it on all of the above as they're expensive investments that must be protected from scratches, contaminents and UV damage. Ceramic coating these modifications will make them significantly easier to clean as well as looking their best for longer than ever before.
No, ditch the chump sauce already! Wax is 70 year old technology. Ceramic coatings need a contaminant and protection free surface to bond to (i.e - your pristine paint job or clear coat) in order to work. Once it's applied it's better than wax in every category anyway, nor should wax bond to it anyway.
Whether it's one of ours or somebody elses, you can apply this to a car which is already coated. You'll still need to prep in full to ensure the best results.
This product is for those committed to their ride. Removal of this product requires hours of wet sanding which may lead to damage of your clear coat. Only commit to a ceramic coating if you are happy with your paint, but worst case scenario, you can always wrap over it.
If you are not completely satisfied with any AvalonKing product you may return it to us unopened for a full no questions asked refund within 90 days of receipt.
Feel free to take advantage of our live chat service, we're happy to answer any questions you may have pronto.
Secure Your Preorder Now
Indulge The G.O.A.T Pro Grade Coating
Armor Shield G.O.A.T.
Frequently Bought With
Customer Reviews
Had this coating suggested and applied on my car by a professional. Have it a bit over a week now and I'm in love with it. Cleaning is a breeze, it keeps the car clean perfectly. Reflection is amazing, although my car is blue you can literally see the reflection nearly like a movie video.
Also I must applause the customer service that helped me with an order issue.
KEEP IT UP!
Alright so I do detailing as a side business and have to say with all the different ceramics I have tried this looks and feels the best. It goes on really easily like the original armor shield IX but dries faster. It hazed in 10 seconds and faded in another 20-30 seconds then I wiped and after wiping it was smoother than any ceramic I have used. It took me 6 hours of prepping the truck I had to do but the end result was satisfying and the owner said it looked like when he bought it in 2017. So for now on I think I will be using this with most customers. We will see how the durability is in a couple years. Good job Avalon King.
It's only been a couple of weeks since installation, but there are couple of things I'd like to note. I installed this on a brand new 2023 Ford Explorer. I prepped with the Ceramic Prep Shampoo using a foam cannon and a good wash. I let the vehicle sit in the garage for a few days after the wash because I didn't have time to get to the ceramic coating right away. This allowed everything to be good and dry before install. The installation was time consuming, but a relatively easy process with the right tools. I coated everything, windows, trim, roof rack and rims. I did not apply it to the tires, I had previously used a product called ExoForma PermaShine on the tires.
I was ready to go ahead and purchase the MAX, but the day I was going to get it, I received an email that the GOAT was available. I decided to go with the GOAT because it was a 50ml bottle and I was going to need 2 bottles of the MAX (30ml) so the cost was only $20 difference for an extra "2 years of performance". I ended up with a little bit left after only one coating. I decided not to apply 2 coatings. I did let it sit in the garage for a couple of days after applying the coating so it would cure well.
After a couple of weeks, I have not had a chance to wash my vehicle and it's been raining quite a bit so it still looks clean because everything just runs off. Overall, very happy with the results!
I have Been using Avalon King for a several years now . Last year I received an offer that Avalon King they Had a New Ceramic Coating called The Goat . It was only available to very Few People so I wanted to Try well waited A couple of Months for it . So I Received a notification that the Ceramic coating called the Goat has shipped. Well without further thought I started the apply the coating. I started with the application first on Paint gave it 2 Coats. Following Day I removed the Wheels off coursed car was washed then Decontamination process. I applied it to the Wheels I gave it 2 coats from there. Next day I coated the outside glass areas finally the Trim & Muffler tips. It’s been only 3 weeks so far it looks great. Getting a lot of Looks since then I coated 3 of my Clients Vehicle. Try the experience don’t wait get it today. Hi Dale hope you’re doing well
Thank you for the review Jose!
I am doing great as well as the little ones!
I’ve been using armour shield products for several years now. So when I saw their new GOAT product I had to try it. It’s definitely a different league. Thicker and the shine is impressive.
One drawback was there was no applicator, but I assume this is because it’s an early test product. Luckily I still had several new ones in my cupboard so no issues there.
Excellent product.
Would recommend. And have.
